Checking The Currently Playing Program Source, Etc; Switching The Brightness Of The Display; Selecting The Play Mode (Pure Direct); Setting The Tone Control - Denon DRA-37 - AM/FM Stereo Receiver Operating Instructions Manual

ENGLISH
Operation
<INPUT SELECTOR> <PRESET>
MEMORY
BAND SHIFT TUNING
MODE
PURE DIRECT <LOUDNESS>
<ON/STANDBY> <TONE DEFEAT>
SHIFT
[FM/AM]
STATUS
PURE DIRECT
BAND
[MEMORY BLOCK]
[TUNER]
About the button names in this explanation
< >
: Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
Checking the currently playing program source,
VIDEO SELECT
etc.
STATUS DIMMER
STATUS
Press
• The current program source and various settings are indicated on
the display.

Switching the brightness of the display

DIMMER
Press
<SELECT>
<TONE CONTROL>
The brightness of the display can be adjusted in three steps. The
<CH VOL> display can also be turned off.
[CHANNEL]

Selecting the play mode (PURE DIRECT)

This mode reproduces the sound with extremely high quality. The
display that could affect the audio signals are turned "OFF".
PURE DIRECT
Press
DIMMER
VIDEO SELECT

Setting the tone control

¢ Adjusting the tone
1
Press
"TREBLE".
2 < SELECT >
Use
Can be adjusted within the range of –10 dB to +10 dB.
MODE
MEMORY
TUNING
.
.
.
< TONE CONTROL >
to select "BASS" or
to set the level.
11
ENGLISH
¢ When you do not want to adjust the tone
< TONE DEFEAT >
Press to select "TONE DEFEAT ON".
¢ When listening with the volume turned low
< LOUDNESS >
Press to select "LOUDNESS ON".

Adjusting the speaker volume

1 < CH VOL >
Press to select the speaker.
The settable speaker switches each time this button is pressed.
< SELECT >
2
Use to adjust the volume.
Can be adjusted within the range of –12 dB to +12 dB.
Combining the currently playing sound with the
desired image (VIDEO SELECT function)
VIDEO SELECT
Press until the desired image appears on
the display.
• To cancel, press VIDEO SELECT to select "SOURCE".
• The video source selected with the video select function is stored in
the memory for the different input sources.
Operation