Setting Up The Spectroproofer; Unpacking And Assembly - X-Rite Stylus Pro 7900 Proofing Edition Setup And Maintenance Manual

Setting Up the
SpectroProofer
Note:
The 44" model is shown.
These instructions also
apply to the 24" model.
Save the original box and
packing materials in case
you need to ship the
equipment.
Follow the steps in this section to install the SpectroProofer in your printer.
Before using the SpectroProofer for the first time, you must also initialize it
as described on page 19.

Unpacking and Assembly

1. Unpack the SpectroProofer and make sure you have all the parts shown
below:
Backing plates
(24" kit)
Mounting rails, bolts, and Allen wrench
Power cord
(varies by region)
7
SpectroProofer
main unit
OR
Spectrophotometer
(ILS20EP or ILS20EPUV)
USB cable Cable hooks
Backing plates
(44" kit)
Calibration tile
and holder
Calibration
strip
7