Introduction; Handling And Product Information - X-Rite Stylus Pro 7900 Proofing Edition Setup And Maintenance Manual

Introduction

Caution:
Do not touch the lens; it
can be easily scratched.
Avoid touching the white
surface of the tile and
backing plates.
The Epson SpectroProofer
that can be installed on the Epson Stylus
When driven by the latest software RIP front-ends, the SpectroProofer can
automate virtually any color management process in your workflow.
Follow the instructions in this guide to install the SpectroProofer in your
printer. This guide also provides maintenance and troubleshooting
information. Once you've set up the SpectroProofer, follow the instructions
that came with your color measuring software to use the equipment.

Handling and Product Information

Exercise care when handling the spectrophotometer, calibration tile, and
backing plates. If they become scratched or soiled, your color measurements
may be affected.
Lens
Calibration tile
Note that the spectrophotometer and tile come as a numbered set; they have
been calibrated to work together. If you purchase two or more products, be
sure you use the same numbered pieces together.
Label on
spectrophotometer
5
™
is an optional in-line color measuring system
®
Pro 7900 and 9900 printers.
Backing plate
Label on tile
5