Using The Rapid Deployment Pack; Connecting Server Blades - HP Rx2620-2 - Integrity - 0 MB RAM User Manual

Rapid deployment pack windows edition user guide 3.70

Hide thumbs Also See for Rx2620-2 - Integrity - 0 MB RAM:

Table of Contents

Using the Rapid Deployment Pack

This section provides information about the following topics:

Creating a reference server and image

Deploying a captured image to other similar servers

Reconfiguring the new servers

Maintaining server blades with rip-and-replace

Performing a Boot from SAN installation

Connecting server blades

Connect the enclosure to the network that contains your Deployment Server, and power up the

enclosure.

Insert the server blades into the enclosure, but do not power on the server blades.

Change the default rack and enclosure names.

Power up the server blades.

Open the Deployment Server Console to view target servers available for deployment and

management. The following panes appear in the console:

Computers—This pane is located on the upper-left side of the console and displays, by

default, New Computers and All Computers. Virtual Machines and Physical Devices are also

displayed (if enabled).

Jobs—This pane is located on the lower-left side of the console and lists the jobs provided

with the Rapid Deployment Pack.

Details—This pane is located on the right side of the console and displays details for the

selections highlighted within the Computers pane or the Jobs pane.

Using the Rapid Deployment Pack 9

Table of Contents

Do you have a question about the Rx2620-2 - Integrity - 0 MB RAM and is the answer not in the manual?

Proliant essentials rapid deployment pack