Epson Stylus Pro 3880 Graphic Arts Edition Color Management Manual page 26

3. Select
North America Prepress 2
(1998) as the RGB working space and activate profile messages.
4. Click
OK
Follow the steps in the next section to open the photo you want to print and
assign a profile to it.
Assign a Profile to Your Photo
1. Open the photo you want to print.
2. If you see an Embedded Profile Mismatch message, select
embedded profile
If you see a Missing Profile message, select
RGB (1998)
balance and contrast as displayed on your monitor. If it looks incorrect, select
Edit > Assign Profile
Select one of the following as the
■
A different RGB working space (or Profile), such as
sRGB IEC61966-2.1
■
A scanner profile for your scanner
■
A camera profile for your digital camera
Also click the
the screen.
Tip:
This is most effective when your monitor is calibrated using a hardware device
such as the X-Rite i1Display 2.
3. Click
OK
4. Select
File > Page Setup
26
Print With Adobe Photoshop
.
and click
and click . When your image appears, evaluate the color
OK
.
box so you can see the effects of your profile choice on
Preview
.
.
from the Settings menu to set Adobe RGB
.
OK
Assign working RGB: Adobe
setting:
Profile
Use the
ColorMatch RGB
or