Toshiba PTME3U-00E00Q User Manual page 154

■
The Wake-up on LAN function consumes power even when the
system is off. Leave the AC adaptor connected while using this
feature.
■
Regarding Wake-up on LAN from sleep or hibernation, you must check
the "Allow the device to wake the computer" check box within the LAN
Device properties. (This feature does not effect the Wake-up on LAN
from sleep or hibernation.)
Power will be automatically turned on when a signal is received from an
administrator's computer which is connected via a network.
The following settings can be changed when the Built-in LAN is Enabled.
Connect the AC adaptor when using the Wake-up on LAN function. The
battery retention time will be shorter than the times listed in this manual
when this function is enabled. Refer to the section in chapter 6,
data with power
Enabled
Disabled
Built-in LAN
This feature enables or disables the Built-in LAN.
Enabled
Disabled
USB
USB KB/Mouse Legacy Emulation
You can use this option to enable or disable USB keyboard/mouse legacy
emulation so that, even if your operating system does not support USB
devices, you can still use a standard USB mouse and keyboard - to achieve
this you should set the appropriate option(s) to Enabled.
Enabled
Disabled
User's Manual
off.
Enables Wake-up on LAN from shutdown.
Disables Wake-up on LAN from shutdown.
(Default)
Enables Built-in LAN functions (Default).
Disables Built-in LAN functions.
Enables the USB KB/Mouse Legacy Emulation
function (Default).
Disables the USB KB/Mouse Legacy Emulation
function.
HW Setup
Retaining
7-5