Toshiba PTMB3U-00X00X User Manual page 220

5. Using a thin-tipped tool, push on the hole in the edge of the Cooling
module cover and slide it in the direction of the arrow to remove.
6. Lift the plastic film and clean the cooling module using a vacuum
cleaner or other cleaning tool.
Do not use a ball pen, cotton swap or similar to remove dust. If these touch
the inside of the computer, it could be damaged or become clogged,
leading to further problems.
7. Slide the Cooling module cover back into place on the computer to
reattach.
8. Install the battery pack (refer to the
in Chapter 6, Power and Power-Up Modes, if required).
9. Turn your computer over.
User's Manual
Cooling module
cover
Figure G-1 Removing the cooling module cover
Figure G-2 Lift the plastic film
TOSHIBA PC Health Monitor
Plastic film
Replacing the battery pack
Hole
section
G-4