Lenovo J100 Hardware Maintenance Manual page 144

10. Lower and latch the handle to secure the microprocessor in the socket.
11. Use the thermal grease syringe to place five drops of grease on the top of the
12. Install the heat sink and fan assembly on the system board.
13. Connect the heat sink and fan assembly to the system board. See "Identifying
14. Position the fan duct on the heat sink fan.
15. Go to "Completing the FRU replacement." on page 143.
138
Lenovo 3000 J Series
microprocessor. Each drop of grease should be 0.03ml (3 tick marks on the
grease syringe).
parts on the system board" on page 85.