Removing And Replacing The Drive Bay Assembly - Lenovo J100 Hardware Maintenance Manual

Removing and replacing the drive bay assembly

You will need to remove the drive bay assembly to access some FRUs.
1. Remove the computer cover. See "Removing the cover" on page 114.
2. Remove the front bezel by releasing the three tabs and pivoting the top of the
3. Remove the two screws at the front of the chassis securing the drive bay
bezel outward.
assembly.
Chapter 9. Replacing FRUs (Types 8453, 8454, 8455, 8456, 8457, 8458, 8459, and 8460)
119