When installing the keyboard, do as follows:
Installation of the keyboard
1. Attach the connectors.
2. Attach the keyboard so that the keyboard edge is under the frame as shown in the following figure.
3. Gently press the keys with your palms and slightly slide the keyboard toward you until it snaps into
position.
4. Secure the keyboard by tightening the screws from the bottom side of the computer.
1170 Keyboard bezel
For access, remove these FRUs in order:
•
"1010 Battery pack" on page 61
•
"1030 Optical drive or travel cover" on page 64
8
Chapter 8
.
Removing and replacing a FRU
85