Table of Contents
Advertisement
The Keyboard
F1 ... F12 function keys
The function keys, not to be confused with Fn, are the 12 keys at the top of
your keyboard.
F1 through F12 are called function keys because they execute
programmed functions when pressed. Used in combination with the Fn key,
keys marked with icons execute specific functions on the computer. See
the section, Soft keys: Fn key combinations, in this chapter. The function
executed by individual keys depends on the software you are using.
Soft keys: Fn key combinations
The Fn (function) is unique to TOSHIBA computers and is used in
combination with other keys to form soft keys. Soft keys are key
combinations that enable, disable or configure specific features.
Some software may disable or interfere with soft-key operations. Soft-key
settings are not restored by the Standby feature.
Hotkeys
Fn + ESC
Fn + F1
Fn + F2
Fn + F3
Fn + F4
Fn + F5
Default resolution for simultaneous mode is set to 1024x768. If you
connect an RGB (Monitor) that is not 1024x768 resolution, change it in
"Display Properties".
5-2
Volume Mute Turns the volume on and off.
Instant Security Enters screen saver mode and
blanks the screen. To restore your desktop, press
any key or use the TouchPad.
Power Save Modes Opens Power Option
Properties. You can check the power status or
configure power saving settings.
Standby This hot key switches the system to
Standby mode.
Hibernate This hot key switches the system to
Hibernate mode.
Display Selection Changes displays.
User's Manual
Advertisement
Table of Contents
