Table of Contents
Advertisement
Troubleshooting
Keyboard
Keyboard problems can be caused by your setup configuration. For more
information refer to Chapter 5,
Problem
Output to screen is
garbled.
LCD panel
Problem
Lines appear broken.
No display
Problems above remain
unresolved or other
problems occur.
Hard disk drive
Problem
Computer does not boot
from hard drive.
Slow performance
9-6
The
Keyboard.
Procedure
Make sure the software you are using is not
remapping the keyboard. Remapping involves
reassigning the meaning of each key. See your
software's documentation.
If you are still unable to use the keyboard,
consult your dealer.
Procedure
Check if you are in DOS mode. In DOS, lines
may appear broken, because of the LCD
screen's higher resolution. The Windows display
should appear normal.
Press hotkeys Fn + F5 to change the display
priority, to make sure it is not set for an external
monitor.
Make sure instant security was not activated. Try
entering your password, if you have one
registered. Or, turn the power off and back on to
clear instant security.
Refer to your software's documentation to
determine if the software is causing the difficulty.
Contact your dealer if the problems continue.
Procedure
Insert a system diskette and reboot.
There may be a problem with your operating
system files. Refer to your operating system
documentation.
Your files may be fragmented. Run SCANDISK
and defragmenter to check the condition of your
files and disk. Refer to your operating system
documentation or online HELP for information on
running SCANDISK and the defragmenter.
Contact your dealer if the problems continue.
User's Manual
Advertisement
Table of Contents
