Appendix A. Command Line Interface - Lenovo ThinkPad G40 Deployment Manual

Appendix A. Command line interface

Access Connections can accept command line input to switch between location
profiles and to import or export locations profiles. You can input these commands
interactively within a command prompt window, or you can create batch files for
use by other users. Access Connections does not need to be running before these
commands are executed.
v Apply Location Profile.
v Disconnect Location Profile.
v Delete Location Profile.
v Import Location Profile (valid only for files with .LOC extension)
v Perform silent imports of all profiles.
v Export Location Profiles (valid only for files with .LOC extension.)
v Apply a test SSID profile for wireless cards (regardless of which profile was
v
v Enter a special monitor mode in which all roaming is blocked, Ethernet as well
v Reset the monitor mode
v Stop all Access Connections processes. Considering this requires administrative
v
v
v
© Lenovo 2008. Portions © IBM Corp. 2005.
<path>\qctray.exe/set <location profile name>
<path>\qctray.exe/reset <location profile name>
<path>\qctray.exe/del <location profile name>
<path>\qctray.exe/imp <location profile path>
<path>\qctray.exe/importsilently
<path>\qctray.exe/exp <location profile path>
most recently active) and return immediately. Do not turn off the Wireless Radio
<path>\qctray.exe/disconnectwl
Close AcMainFUI, Ac Tray, AcWIIcon modules.
<path>\qctray.exe/exit
as Wireless. Also when the third party application that has called this API is
closed, reset the monitor mode
<path>\qctray.exe/setmonitormode
<path>\qctray.exe/resetmonitormode
privileges, the command will be routed through AcPrfMgrSvc to close all other
Access Connections processes except for profile manager service.
<path>\qctray.exe/killac
Restart all Access Connections processes. Considering this requires
administrative privileges, the command will be routed through AcPrfMgrSvc.
<path>\qctray.exe/startac
Find Wireless networks.
<path>\qctray.exe /findwInw
Display QCTRAY help information.
<path>\qctray.exe /help
29