Table of Contents
Advertisement
Configuring the HDD security setting using the BIOS
You can set a password in the BIOS Setup to protect your HDD.
To set a password for your HDD from the BIOS Setup:
1.
Press <Delete> to enter the BIOS Setup at startup.
From the BIOS Setup EZ Mode screen, click Exit > Advanced Mode. From the
.
Advanced Mode screen, click Main > HDDx: [name of HDD] to open the HDD
Password screen.
Select the Set User Password item and press <Enter>.
.
From the Create New Password box, key in a password, then press <Enter>.
4.
5.
Confirm the password when prompted.
Click Exit and select Save Changes & Reset to save the changes made.
6.
Take note of this password, which you would need to enter the OS.
To change the password for your HDD from the BIOS Setup:
1.
Follow steps 1 and of the previous section to open the HDD Password screen.
Select the Set User Password item and press <Enter>.
.
From the Enter Current Password box, key in the current password, then press
.
<Enter>.
From the Create New Password box, key in a new password, then press <Enter>.
4.
5.
Confirm the password when prompted.
Click Exit and select Save Changes & Reset to save the changes made.
6.
To clear the user password, follow the same steps as in changing a user password, but press
<Enter> when prompted to create/confirm the password. After you clear the password, the
Set User Password item on top of the screen shows Not Installed.
58
Chapter 5: Using your computer
Advertisement
Table of Contents
