Asus P3B-F - Motherboard - ATX User Manual page 26

3. HARDWARE SETUP
3. Insert the SECC2/SECC/SEPP
SECC with Pentium
a click (the picture in step 2 shows the locks in the outward position and inward in
the picture below).
With the heatsink facing the motherboard's chipset, push the SECC2, SECC, or
SEPP gently but firmly into the Slot 1 connector until it is fully inserted.
SECC
Push lock inward
4. Secure the SECC2/SECC/SEPP
Secure the SECC2/SECC/SEPP in place by pushing the SECC2/SECC/SEPP
until it is firmly seated on the Slot 1 connector.
SECC with Pentium
cured so that the lock shows through the retention mechanism's lock holes.
SECC
Lock hole
26
®
II only: Push the SECC's two locks inward until you hear
CPU fan cable to
fan connector
®
II only: The SECC locks should be outward when se-
CPU fan cable to
fan connector
ASUS P3B-F User's Manual
SECC2/SEPP
SECC2/SEPP
Lock hole
CPU fan cable to
fan connector
CPU fan
cable to fan
connector