Asus P2Z-VM User Manual page 23

III. HARDWARE SETUP
WARNING!
Make sure the heatsink is mounted tightly against the SECC, SECC2
or SEPP; otherwise, the CPU will overheat. You may install an auxiliary fan to
provide adequate circulation across the processor's passive heatsink.
3. Insert the SECC/SECC2/SEPP
SECC with Pentium
a click (the picture in step 2 shows the locks in the outward position and inward in
the picture below).
With the heatsink facing the motherboard's chipset, push the SECC, SECC2, or
SEPP gently but firmly into the Slot 1 connector until it is fully inserted.
SECC
Push lock inward
4. Secure the SECC/SECC2/SEPP
Secure the SECC/SECC2/SEPP in place by pushing the SECC/SECC2/SEPP
until it is firmly seated on the Slot 1 connector.
SECC with Pentium
cured so that the lock shows through the retention mechanism's lock holes.
SECC
Lock hole
®
II only: Push the SECC's two locks inward until you hear
CPU fan cable to
fan connector
®
II only: The SECC locks should be outward when se-
CPU fan cable to
fan connector
ASUS P2Z-VM User's Manual
SECC2/SEPP
CPU fan cable to
fan connector
SECC2/SEPP
CPU fan
cable to fan
connector
23