ASROCK 970DE3/U3S3 User Manual page 9

CAUTION!
1. This motherboard supports Untied Overclocking Technology. Please read
"Untied Overclocking Technology" on page 31 for details.
2. This motherboard supports Dual Channel Memory Technology. Before
you implement Dual Channel Memory Technology, make sure to read the
installation guide of memory modules on page 16 for proper installation.
3. Whether 1866/1600MHz memory speed is supported depends on the
AM3/AM3+ CPU you adopt. If you want to adopt DDR3 1866/1600 mem-
ory module on this motherboard, please refer to the memory support list
on our website for the compatible memory modules.
ASRock website: http://www.asrock.com
4. Due to the operating system limitation, the actual memory size may be
less than 4GB for the reservation for system usage under Windows
TM
Vista / XP. For Windows
limitation.
5. It is a user-friendly ASRock overclocking tool which allows you to surveil
your system by hardware monitor function and overclock your hardware
devices to get the best system performance under Windows
ment. Please visit our website for the operation procedures of ASRock
OC Tuner. ASRock website: http://www.asrock.com
6. Featuring an advanced proprietary hardware and software design, Intel-
ligent Energy Saver is a revolutionary technology that delivers unparal-
leled power savings. The voltage regulator can reduce the number of out-
put phases to improve effi ciency when the CPU cores are idle. In other
words, it is able to provide exceptional power saving and improve power
effi ciency without sacrifi cing computing performance. To use Intelligent
Energy Saver function, please enable Cool 'n' Quiet option in the BIOS
setup in advance. Please visit our website for the operation procedures
of Intelligent Energy Saver. ASRock website: http://www.asrock.com
7. ASRock Instant Flash is a BIOS fl ash utility embedded in Flash ROM.
This convenient BIOS update tool allows you to update system BIOS
without entering operating systems fi rst like MS-DOS or Windows
this utility, you can press <F6> key during the POST or press <F2> key to
BIOS setup menu to access ASRock Instant Flash. Just launch this tool
and save the new BIOS fi le to your USB fl ash drive, fl oppy disk or hard
drive, then you can update your BIOS only in a few clicks without prepar-
ing an additional fl oppy diskette or other complicated fl ash utility. Please
be noted that the USB fl ash drive or hard drive must use FAT32/16/12 fi le
system.
®
64-bit OS with 64-bit CPU, there is no such
9
®
7 /
®
environ-
®
. With