Storage Confi Guration - ASROCK 970DE3/U3S3 User Manual

3.4.4 Storage Configuration
BIOS SETUP UTILITY
Advanced
Storage Configuration
Onboard SATA Controller
SATA Operation Mode
SATA IDE Combined Mode
Onboard SATA3 Operation Mode
IDE1 Master
IDE1 Slave
SATAII_1
SATAII_2
SATAII_3
SATAII_4
SATAII_5
SATAII_6
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
Onboard SATA Controller
This item is for SATA2 ports. Use this item to enable or disable the "Onboard
SATA Controller" feature.
SATA Operation Mode
This item is for SATA2 ports. Use this item to adjust Onboard SATA Opera-
tion Mode. The default value of this option is [AHCI]. Confi guration options:
[AHCI], [IDE] and [RAID].
If you set this item to RAID mode, it is suggested to install SATA ODD
driver on SATAII_5 (PORT 4) and SATAII_6 (PORT 5) ports.
SATA IDE Combined Mode
This item is for SATAII_5 (PORT 4) and SATAII_6 (PORT 5) ports. Use this
item to enable or disable SATA IDE combined mode. The default value is
[Enabled].
If you want to build RAID on SATAII_5 (PORT 4) and SATAII_6 (PORT 5
ports, please disable this item.
Onboard SATA3 Operation Mode
This item is for SATA3 ports. Use this item to adjust Onboard SATA3 Op-
eration Mode. The default value of this option is [AHCI]. Confi guration op-
tions: [IDE], [AHCI] and [Disabled].
Configure onboard
serial ATA
controller.
[Enabled]
[AHCI]
[Enabled]
[AHCI]
[Hard Disk]
[Not Detected]
[Not Detected]
[Not Detected]
Select Screen Select Screen
[Not Detected]
Select Item Select Item
[Not Detected]
+- +- Change Option Change Option
[Not Detected]
F1 F1 General Help General Help
[Not Detected]
F9 F9 Load Defaults Load Defaults
F10 F10 Save and Exit Save and Exit
ESC ESC Exit Exit
43