Listening To Radio; Dolby Pro Logic Ii Mode; Presetting Stations; About Rds Broadcasting - Samsung HT-D550 User Manual

Basic Functions

Dolby Pro Logic II Mode

You can select the desired Dolby Pro
Logic II audio mode.
Press the PL II button.
When listening to music, you can
MUSIC
experience sound effects as if you are
listening to the actual performance.
MOVIE Adds realism to the movie soundtrack.
You can listen to a 2CH sound source
in 5.1CH surround sound with all
speakers active.
PROLOG
- A specifi c speaker(s) may not be
output depending on the input signal.
You will hear multi-channel surround
MATRIX
sound.
Select this to listen to sound from the
STEREO
front left and right speakers and the
subwoofer only.
✎
NOTE

When selecting Pro Logic II mode, connect
your external device to the AUDIO INPUT jacks
(L and R) on the product. If you connect to only
one of the inputs (L or R), you cannot listen to
surround sound.

The Pro Logic II function is only available in
Stereo mode.

The Pro Logic II function is not available while
playing AC3 signal in 2.1 channel mode.

Listening to Radio

Using buttons on the Remote Control
1. Press the FUNCTION button to select FM.
2. Tune in to the desired station.
•
Preset Tuning 1 : You must fi rst add a desired
frequency as a preset. Press the STOP ()
button to select PRESET and then press the
TUNING/CH (
station.
38
English
HT-D550_D555-TK-ENG-1228.indd 38 HT-D550_D555-TK-ENG-1228.indd 38
) button to select the preset
•
Manual Tuning : Press the STOP () button to
select MANUAL and then press the TUNING/CH
( ) button to tune in to a lower or higher
frequency.
•
Automatic Tuning : Press the STOP () button
to select MANUAL and then press and hold the
TUNING/CH ( ) button to automatically
search the band.
Setting Mono/Stereo
Press the MO/ST button.
•
Each time the button is pressed, the
sound switches between STEREO and
MONO.
•
In a poor reception area, select MONO for a clear,
interference-free broadcast.

Presetting Stations

Example : Presetting FM 89.10 in the memory
1. Press the FUNCTION button to select FM.
2. Press the TUNING/CH (
<89.10>.
3. Press the TUNER MEMORY button.
•
Number fl ashes on the display.
4. Press the TUNING/CH (
to select preset number.
•
You can select between 1 and 15
presets.
5. Press the TUNER MEMORY button again.
•
Press the TUNER MEMORY button before
number disappears from the display.
•
Number disappears from the display and the
station is stored in memory.
6. To preset another station, repeat steps 2 to 5.

About RDS broadcasting

Using the RDS (Radio Data System) to
receive FM stations
RDS allows FM stations to send an additional
signal along with their regular program signals.
For example, the stations send their station names,
as well as information about what type of program
they broadcast, such as sports or music, etc.
When tuned to an FM station which provides the RDS
service, the RDS indicator lights up on the display.
) button to select
) buttons
2011-12-29 2011-12-29 11:37:16 11:37:16