Table of Contents
Advertisement
8-1. To attach the upper switch housing, partially install
#6-32 machine screws into the switch housing
mounting plate.
8-2. Align the keyhole slots in the housing with the
machine screws.
8-3. Turn the housing counterclockwise until the
machine assembly screws are firmly situated in
the narrow end of the keyhole slots. Install the
remaining screw into the housing. Tighten all three
screws firmly.
CAUTION: Make sure the upper switch housing is
securely attached to the switch housing mounting plate.
Failure to properly attach and tighten all three assembly
screws could result in the switch housing fixture falling.
8-4. Place the lower switch housing assembly over the
upper switch housing. Align the side screw holes in
the upper and lower switch housings. Attach the
lower switch housing to the upper switch housing
with three housing assembly screws.
Note: This fan is not compatible with any light kit.
8 • Installing the Switch Housing
Mounting
#6-32
MachineScrew
Housing
Switch
Housing
Assembly
Screw
13
45084-01 • 01/17/12 • Hunter Fan Company
Plate
Upper
Switch
Lower
Switch
Step 8-4
Housing
Step 8-1
Step 8-3
Advertisement
Table of Contents
