NETGEAR WN2000RPT - Universal WiFi Range Extender User Manual page 22

To view or change the advanced wireless settings:
From the range extender menu at http://www.mywifiext.net, under the Advanced heading,
select Wireless Settings. The following screen displays:
You can view or configure the following settings:
Enable Wireless Access Point. Enable the extender to work as a wireless access point.
•
If this check box is cleared, then computers or wireless devices cannot connect wirelessly
to the extender.
Enable SSID Broadcast. Enable the extender to broadcast its wireless network name
•
(SSID). If this check box is cleared, then the wireless network is hidden. To join a hidden
wireless network, you have to type the wireless name.
Disable Device's PIN. Selecting this check box disables the extender's PIN. The PIN can
•
be used for a WPS wireless connection.
Keep Existing Wireless Settings. When this check box is selected, the settings in the
•
Wireless Settings screen stay the same when WPS is used for a wireless connection.
Setup Access List. Specify a list of computers or wireless devices that are allowed to
•
connect to the network. If you use an access list, then computers that are not on the list
are not allowed to join the wireless network.
22 | Chapter 2. Range Extender Network Settings
Universal WiFi Range Extender WN2000RPT