Setting The Cooking Time; Setting A Later End Time; Setting The Timer - Bosch HBC86P753B Instruction Manual

Setting the cooking time

If you set the cooking time for your dish, operation stops
automatically once this time has elapsed. The oven stops
heating.
Prerequisite: The type of heating and temperature must be set.
Note: You can only set hours and minutes.
Example in the picture: top/bottom heating setting, 180 °C,
cooking time of 45 minutes
0
1. Press the button.
The Time-setting options menu appears.
Turn the rotary selector to set the cooking time.
2.
0
Press the button.
3.
The Time-setting options menu closes.
If the operation has not yet started, press the
4.
can see the cooking time counting down in the status bar.
The cooking time has elapsed
A signal sounds. The oven stops heating. The status bar shows
0
the cooking time as 00:00:00. You can cancel the signal early
by pressing the button.
Cancelling the cooking time
0
Press the button to open the menu. Set the cooking time
to 00:00:00 using the rotary selector. Press the
close the menu.
Changing the cooking time
0
Press the button to open the menu. Change the cooking
time using the rotary selector. Press the
menu.

Setting a later end time

Please remember that easily spoiled foods must not be allowed
to remain in the cooking compartment for too long.
A later end time can be set for
all types of heating and all dishes from the recommended
■
settings
a variety of programmes
■
and for self-cleaning
■
Example: you put the dish in the cooking compartment at 9.30 .
It takes 45 minutes to cook and will be ready at 10.15, but you
would like it to be ready at 12.45 instead.
Change the end time from 10.15 to 12.45. The oven goes into
standby. Cooking starts at 12.00 and finishes at 12.45.
This function is also available for self-cleaning. You can shift the
time of the cleaning operation so it is carried out at night, which
means that the oven is available at all times during the day.
14
n
button. You
0
button to
0
button to close the
Setting a later end time
Precondition: The selected operation has not already begun
0
and a cooking time has been set. The time-setting options
menu is open.
Switch to "End" using the
1.
operation is displayed in the second line.
Set a later end time by turning the rotary selector.
2.
0
Press the button to close the Time-setting options menu.
3.
Confirm by pressing the
4.
The setting is adopted. The oven is in
time is displayed in the status bar. When cooking starts, the
cooking time is shown counting down in the status bar.
The cooking time has elapsed
A signal sounds. The oven stops heating. The status bar shows
0
the cooking time as 00:00:00. You can cancel the signal early
by pressing the button.
Correcting the end time
This is possible while the oven is in standby. Press the
button to open the menu. Press the
End time using the rotary selector. Press the
the menu.
Cancelling the end time
This is possible while the oven is in standby. Press the
button to open the menu. Press the
End time using the rotary selector. Press the
the menu.

Setting the timer

The timer runs independently of the oven. You can use it as a
kitchen timer and set it at any time.
0
Press the button.
1.
The time-setting options menu appears.
Set the running time for the timer using the rotary selector.
2.
0
3. Press the button to close the Time-setting options menu.
The display returns to its previous state. The
timer appears, and the time can be seen counting down.
When the time has elapsed
U
A signal sounds. The time has elapsed. The display shows
00:00. You can cancel the signal earlier by pressing the
button.
Cancelling the timer time
0
Press the button to open the time-setting options menu.
0
Using the rotary selector, turn the time back to 00:00. Press
the button to close the menu.
X
button. The end time of the
n
button.
0
... standby. The end
X
0
button and correct the
button to close
X
0
button and reset the
button to close
U
symbol for the
0
0
0