Download Print this page

Dynex DX-37L200A12 Quick Setup Manual page 2

32" lcd tv
Hide thumbs Also See for DX-37L200A12:

Advertisement

Setting up and using your remote control
1 Press the release button on the back of the remote to remove the battery compartment cover.
2 Insert two AAA batteries into the battery compartment. Make sure that the + and – symbols on
the batteries match the + and – symbols in the battery compartment.
3 Replace the cover.
INPUT SOURCE
TV
AV
Component
HDMI1
HDMI2
USB
Aspect ratio options
Normal:
Displays the original 4:3 aspect ratio with black bars vertical on the left and
right hand side of the screen. If the original aspect ratio is 16:9, then the
image displays in 16:9.
Zoom:
Expands the image to fill the screen. The top and bottom of the image may
be cropped.
Wide:
Use this option to view content recorded in a 16:9 (wide-screen) aspect
ratio.
Cinema:
Stretches the image at the edges, but keeps a clear image in the center.
Auto:
Automatically adjusts the image based on the screen size and the TV
program. Note: Auto is only available when Auto Zoom in the Channels
menu is set to On.
Programming your remote control
To program your universal remote control to work with your new Dynex TV, see the table for common codes. If you have problems programming your remote or need a different remote control code, visit http://www.dynexproducts.com/remotecodes
for the latest remote control code information.
Universal remote controls
One for All
Philips
RCA
Sony
Cablevision
0054
0198, 0490
135
068, 069, 078, 096,
068, 069, 078, 096,
100, 164, 168, 229,
100, 164, 168, 229, 026
026
Connecting power
Plug the AC power cord into the AC IN jack on the back of your TV,
then plug the other end of the cord into a power outlet.
Back of TV
Power cord
Power outlet
Opens the Input Source list.
Enter a digital sub-channel number.
(Example: 4.1)
Opens a TV status banner.
Confirms selections or changes.
Opens the on-screen menu.
Mutes the sound.
Changes the volume.
Quick Launch Inputs
Selects another source connected to
Note: The VGA button has no
Changes how the picture displays
on the screen.
Selects the picture modes.
Sets the sleep timer.
Universal remote TV codes
Cable/Satellite/Set-top box
Charter
Comcast
Cox
DirectTV
Dish Network
2002, 1204, 1423, 1517, 0171,
10171, 11204, 11326,
1326,
10171, 11204, 11326,
1963, 0463, 1463, 0842, 1326,
11463, 11517, 11641,
1463
11517, 11564, 11641,
167, 415, 424, 450, 456, 461,
11780, 11785, 11892,
11963, 12002
507, 523, 567, 577, 586
11963, 12002
Turning on your TV for the first time
1 Connect the power cord to your TV and to a power outlet, then press
Your Menu Language screen opens.
2 Press ▲ or ▼ to highlight a language, then press ENTER. The Choose Your Time Setting screen
opens with Mode highlighted.
3 Press ◄ or ► to select Auto or Manual. If you select Auto, the date and time are set
automatically from a digital TV signal. If you select Manual, you can manually set the date and
time. Press ENTER. The Choose Your Picture Mode screen opens.
4 Press ▲ or ▼ to highlight Home Mode or Retail Mode, then press ENTER. If you select Retail
Mode, a message asks you to confirm your selection. Select Yes or No. Retail Mode is not an
energy-saving mode. The Choose Your TV Source screen opens.
5 Press ▲ or ▼ to highlight Antenna, Cable, or Cable/Satellite Box. If you select Antenna or
Cable, your TV scans for available channels. The scan may take several minutes.
Cable/Satellite Box, your TV does not scan for channels.
6 To watch TV, press INPUT, then press ▲ or ▼ to select the video input source for your TV signal.
For example, select HDMI if your TV is connected to a cable/satellite box using an HDMI cable or
select TV if your TV is connected to an antenna or cable/satellite using a coaxial cable.
3 7" LC D T V I Q U I C K S E T U P G U I D E I DX-3 7L 20 0 A 12
Input
Power
Turns your TV on or off.
Numbers
Enter channel numbers.
.
RECALL
INFO
Returns to the previous channel.
GUIDE
ENTER
Displays the program guide.
Arrows
MENU
Navigates in on-screen menus.
EXIT
MUTE
Closes the on-screen menu.
Volume
Channel
Changes the TV channels.
FAVORITE
Opens the Favorite Channel List.
your TV.
function.
MTS/SAP
ZOOM
Cycles through mono, stereo, and
secondary audio for analog programs.
CH-LIST
Opens the channel list.
PICTURE
CCD
SLEEP
Turns closed captioning on or off.
AUDIO
Selects the audio modes.
Time Warner
TiVo
Verizon
720
400, 450, 461,
0091
0198, 0490
456, 10463,
1463, 0463
Setup Wizard
Choose Your Menu Language
(power). The Choose
English
Français
Español
Move
Select
MENU
Back
EXIT
Set menu language to English, Français, or Español.
Setup Wizard
Choose Your Time Setting
Mode
Auto
Time Zone
Pacific
DST
Off
Year
2011
Savings
Month
July
If you select
Day
15
Time
09 : 05 AM
/Time
Move
Select
MENU
Back
EXIT
If Automatic, options are automatically set by TV source.
One-year limited warranty
Visit www.dynexproducts.com for details.
Need additional help?
See your User Guide! This comprehensive guide
includes everything from basic how-to steps to
more advanced features. Go to
www.dynexproducts.com, then click Support &
Service. Enter your model number in the Search
field, then press Enter. Click Support/Downloads.
We're here for you
www.dynexproducts.com
For customer service, call:
800-305-2204 (U.S./Canada markets)
Distributed by Best Buy Purchasing, LLC
7601 Penn Avenue South, Richfield, MN USA 55423-3645
© 2011 BBY Solutions, Inc., All Rights Reserved.
DYNEX is a trademark of BBY Solutions, Inc. Registered in some
countries. All other products and brand names are trademarks of
their respective owners.
Setup Wizard
Choose Your Picture Mode
Home Mode
Retail Mode
Next
Next
Exit
Move
Select
MENU
Back
EXIT
Exit
Reduces total power consumption.
Setup Wizard
Choose Your TV Source
Antenna
RF CH :
0
Cable
0
Digital Channels
Cable/Satellite Box
0
Analog Channels
Scan for channels
Next
Exit
Move
Select
MENU
Back
EXIT
Exit
Select Antenna if using an antenna for standard or HDTV.
ENGLISH 11-0940

Advertisement

loading