Examples Of Connection - Sanyo PLC-HF10000L - 10000 Lumens Owner's Manual
Wired setting projector set-up and operation
Hide thumbs
Also See for PLC-HF10000L - 10000 Lumens:
- Manual (105 pages) ,
- Brochure (1 page) ,
- Specification sheet (1 page)
Table of Contents
Advertisement
Chapter 5 Appendix
Examples of connection
Peer-To-Peer connection
Connecting the projector (PJ01) to the control computer (PC05) directly.
Projector Name: PJ01
IP Address
: 192.168.0.2
Subnet Mask
: 255.255.255.0
Default Gateway
: 0.0.0.0
DNS
: 0.0.0.0
Connecting the projector (PJ01) to the control computer (PC05) via the hub.
Projector Name: PJ01
IP Address
: 192.168.0.2
Subnet Mask
: 255.255.255.0
Default Gateway
: 0.0.0.0
DNS
: 0.0.0.0
✐ When the projector is connected to the computer directly without hub, the UTP cross cable
should be used.
* UTP cross cable
Hub
Computer Name: PC05
IP Address
: 192.168.0.5
Subnet Mask
: 255.255.255.0
Default Gateway
:
DNS
:
Computer Name: PC05
IP Address
: 192.168.0.5
Subnet Mask
: 255.255.255.0
Default Gateway
:
DNS
:
Computer Name: PC10
IP Address
: 192.168.0.10
Subnet Mask
: 255.255.255.0
Default Gateway
:
DNS
:
Advertisement
Table of Contents
