Labeling The Channels - Samsung HLS5686WX - 56" Rear Projection TV Owner's Instructions Manual

Channel Control

Labeling the Channels

Use this feature to assign an easy-to-remember label to analog channels (i.e., "CBS", "ESPN",
"PBS2", CNN02", etc.) A label consists of five fields, where each field is a letter, a number or a
blank. When the INFO button is pressed, the channel label will appear below the channel number.
English - 54
1
Press the CH or CH
will be labeled.
2
Press the MENU button.
Press the ... or † button to
select "Channel", then press
the ENTER button.
Press the ... or † button to
select "Name", then press
the ENTER button.
3
Press the ... or † button to
move to the channel to be
assigned to a new name,
then press the ENTER button.
Press the ... or † button to
select a letter, a number or a
blank. (Results in this
sequence: A...Z, 0...9, +, -,
✽, /, blank).
4
Press the √ button to switch
to the next field, which will
be selected.
Select a second letter or digit
pressing ... or † button, as
above.
Repeat the process to select
the last three digits.
Press the ENTER button.
After all settings are completed, select "OK" using the √ button.
Press the ENTER button to save the settings and return to the
previous menu.
To erase the assigned new name, select "Clear" by pressing
the œ or √ button, then press the ENTER button.
Press the EXIT button to exit.
NOTE
• If you add or delete a TV channel, the channel label (if set) will
also be added or deleted.
button to tune to the channel that
Channel
Antenna : Air
Auto Program
Channel Manager
Name
Fine Tune
Signal Strength
LNA : On
Move Enter
Name
▲
Air 2 A
Clear
▼
Air 3 - - - - - Clear
Air 4 - - - - - Clear
Air 5 ----- Clear
Air 6 ----- Clear
▼
Move Adjust
Name
▲
Air 2 CNN02 Clear
▼
Air 3 - - - - - Clear
Air 4 - - - - -
Clear
Air 5 ----- Clear
Air 6 ----- Clear
▼
Move Adjust
√
√
√
√
√
√
√
Return
OK
Return
OK
Return