Integrated Peripherals - Gigabyte GA-A75M-D2H User Manual

2-6

Integrated Peripherals

CMOS Setup Utility-Copyright (C) 1984-2011 Award Software
OnChip SATA Controller
OnChip SATA Type
x OnChip SATA Port4/5 Type
x OnChip SATA Port as ESP
Onboard LAN Function
Onboard LAN Boot ROM
 SMART LAN
Onboard Audio Function
USB Controllers
USB Legacy Function
USB Storage Function
Onboard Serial Port 1
higf: Move Enter: Select
F5: Previous Values
OnChip SATA Controller
Enables or disables the integrated SATA controllers. (Default: Enabled)
OnChip SATA Type (SATA3_0~SATA3_3 connectors)
Configures the operating mode of the SATA3_0~SATA3_3 connectors.
Native IDE Allows the SATA controller to operate in Native IDE mode. (Default)
Enable Native IDE mode if you wish to install operating systems that support Native
mode.
RAID Enables RAID for the SATA controller.
AHCI Configures the SATA controllers to AHCI mode. Advanced Host Controller Interface
(AHCI) is an interface specification that allows the storage driver to enable advanced
Serial ATA features such as Native Command Queuing and hot plug.
OnChip SATA Port4/5 Type (SATA3_4 and SATA3_5 connectors)
This option is configurable only when OnChip SATA Type is set to RAID or AHCI. Configures the oper-
ating mode of the SATA3_4 and SATA3_5 connectors.
IDE Disables RAID for the SATA controller and configures the SATA controller to PATA
mode. (Default)
As SATA Type The mode depends on the OnChip SATA Type settings.
Integrated Peripherals
[Enabled]
[Native IDE]
IDE
Press Enter
[Enabled]
[Disabled]
[Press Enter]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[3F8/IRQ4]
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
- 43 -
Item Help
Menu Level 
ESC: Exit F1: General Help
F7: Optimized Defaults
BIOS Setup