Advanced Bios Features - Gigabyte GA-A75M-S2V User Manual

User manual

Hide thumbs

Table Of Contents

Table of Contents

2-5 Advanced BIOS Features

 IGX Configuration

Virtualization

AMD K8 Cool&Quiet control

 Hard Disk Boot Priority

EFI CD/DVD Boot Option

First Boot Device

Second Boot Device

Third Boot Device

Password Check

HDD S.M.A.R.T. Capability

Away Mode

Full Screen LOGO Show

Init Display First

: Move

Enter: Select

F5: Previous Values

IGX Configuration

The settings in this submenu are synchronous to those under the same items on the MB Intelligent

Tweaker(M.I.T.) main menu.

Virtualization

Virtualization allows a platform to run multiple operating systems and applications in independent parti-

tions. With virtualization, one computer system can function as multiple virtual systems.

(Default: Disabled)

AMD K8 Cool&Quiet control

Auto

Lets the AMD Cool'n'Quiet driver dynamically adjust the CPU clock and VID to re-

duce heat output from your computer and its power consumption. (Default)

Disabled

Disables this function.

Hard Disk Boot Priority

Specifies the sequence of loading the operating system from the installed hard drives. Use the up or

down arrow key to select a hard drive, then press the plus key <+> (or <PageUp>) or the minus key <-> (or

<PageDown>) to move it up or down on the list. Press <Esc> to exit this menu when finished.

EFI CD/DVD Boot Option

Set this item to EFI if you want to install the operating system to a hard drive larger than 2.2 TB. Make

sure the operating system to be installed supports booting from a GPT partition, such as Windows 7 64-

bit and Windows Server 2003 64-bit. Auto lets the BIOS automatically configure this setting depending

on the hard drive you install. (Default: Auto)

First/Second/Third Boot Device

Specifies the boot order from the available devices. Use the up or down arrow key to select a device

and press <Enter> to accept. Options are: LS120, Hard Disk, CDROM, ZIP, USB-FDD, USB-ZIP, USB-

CDROM, USB-HDD, Legacy LAN, Disabled.

Password Check

Specifies whether a password is required every time the system boots, or only when you enter BIOS

Setup. After configuring this item, set the password(s) under the Set Supervisor/User Password item in

the BIOS Main Menu.

Setup

A password is only required for entering the BIOS Setup program. (Default)

System

A password is required for booting the system and for entering the BIOS Setup

program.

BIOS Setup