Standard Cmos Features - Gigabyte GA-A75M-S2V User Manual

User manual

Hide thumbs

Table Of Contents

Table of Contents

2-4 Standard CMOS Features

Date (mm:dd:yy)

Time (hh:mm:ss)

 IDE Channel 0 Master

 IDE Channel 0 Slave

 IDE Channel 1 Master

 IDE Channel 1 Slave

 IDE Channel 2 Master

 IDE Channel 3 Master

Halt On

Base Memory

Extended Memory

: Move

Enter: Select

F5: Previous Values

Date (mm:dd:yy)

Sets the system date.

Time (hh:mm:ss)

Sets the system time.

IDE Channel 0, 1 Master/Slave

IDE HDD Auto-Detection

Press <Enter> to autodetect the parameters of the SATA device on this channel.

IDE Channel 0, 1 Master/Slave

Configure your SATA devices by using one of the two methods below:

Lets the BIOS automatically detect SATA devices during the POST. (Default)

• Auto

If no SATA devices are used, set this item to None so the system will skip

• None

the detection of the device during the POST for faster system startup.

Access Mode

Sets the hard drive access mode. Options are: Auto (default), CHS, LBA, Large.

IDE Channel 2, 3 Master

IDE Auto-Detection

Press <Enter> to autodetect the parameters of the SATA device on this channel.

Extended IDE Drive

Configure your SATA devices by using one of the two methods below:

Lets the BIOS automatically detect SATA devices during the POST. (Default)

• Auto

If no SATA devices are used, set this item to None so the system will skip

• None

the detection of the device during the POST for faster system startup.

Access Mode

Sets the hard drive access mode. Options are: Auto (default), Large.

Capacity

Approximate capacity of the currently installed hard drive.

Halt On

Allows you to determine whether the system will stop for an error during the POST.

Options are: "All Errors," "No Errors," "All, But Keyboard". (Default)

Memory

These fields are read-only and are determined by the BIOS POST.