Table of Contents
Advertisement
going through the hose. If you are unable to determine the cause
of the problem, do not simply continue pushing the control
module button, as this may damage the unit. Return the
machine to your ANTARI dealer immediately.
Control Module Operation
!
X-10:
10 meter wired multi-function remote control
module with 5-pin XLR connector for ANTARI X Series
models X-310, X-510, X-515, X-530. Its interface
allows the operator to customize fog machine functions
by adjusting fogging duration, interval and volume. Its
LCD displays current operating parameters, which are
automatically stored in non-volatile memory, allowing
the machine to be powered down without losing
function settings. Instructions below:
1.
Via the Function key, you can adjust the desired
settings. Pressing the Function key will cycle through
different options including Volume, Timer, Heat &
Fan. The Enter (Volume) Key is used to select the
desired option. To adjust fog output volume setting,
simply go into Volume option. Adjust the volume
FUNCITON
VOLUME
MANUAL
TIMER
ESC
ENTER
ON / OFF
6
Advertisement
Table of Contents
