Table of Contents
Advertisement
Maintenance
Do not allow the fog liquid to become contaminated. Always
replace the caps on the fog liquid container and the fog machine
liquid tank immediately after filling.
After every 40 hours of continuous operation, it is recommended to
run a cleaning solution composed of 80% distilled water and 20%
white vinegar through the system to prevent the accumulation of
particulate matter in the heating element. The recommended
cleaning regimen is as follows:
1.
Empty all fog fluid from machine. Add cleaning
solution to tank. Plug unit in and begin warm up.
2.
Run unit in a well-ventilated area until tank is
empty.
3.
Cleaning is now complete. Refill with fog liquid.
Note:
All fog machines are prone to clogging due to the thick
consistency of fog fluid and the high temperature at which it
vaporizes. However, a properly maintained fog machine should
provide years of reliable use.
Clean with a dry cloth only. Store dry.
Cleaning your fog machine regularly will help reduce costly
parts replacement and repair charges.
10
Advertisement
Table of Contents
