Adjusting The Timer Function - LG M4210C-BA - - 42" LCD Flat Panel Display User Manual

Adjusting the timer function
Clock
Off / On time
Auto sleep
If the time is on the clock is incorrect, reset the clock manually.
1) Press the MENU button and then use • • button to select the TIME menu.
2) Press the • button and then use • • button to select the Clock menu.
3) Press the • button and then use • • button to set the hour(00-23).
4) Press the • button and then use • • button to set the minutes(00~59).
The off time automatically switches the set to standby at the pre-set time.
1) Press the MENU button and then use • • button to select the TIME menu.
2) Press the • button and then use • • button to select Off time or On time.
3) Press the • button and then use • • button to set the hour(01 ~23).
4) Press the • button and then use • • button to set the minutes(00~59).
5) Press the • button and then use • • button to select On or Off.
If Auto sleep is active and there is no input signal, the set switches to standby mode
automatically after 10 minutes.
1) Press the MENU button and then use • • button to select the Auto sleep menu.
2) Press the • button and then use • • button to select On or Off.
Note
i !n the even t Ofpower interruption (disconnection Orpower failure), the clock must be ieset.
t Once the On or off time is set, these functions operate daily at the pres et time.
i Off time function overrides On time function if they are set tOthe same time,
, The set must be in standby mode for the On time to work,
i When On time is Operated, input Screen is tume d on as it was tumed of!: