® STEP 3 - ASSEMBLING THE FAN STANDARD AND ANGLE CAUTION MOUNTING Pipe For Standard 8-foot Ceilings and Higher Canopy Canopy Trim Ring Adapter Cover Allen Head Pipe Setscrew Allen Wrench IMPORTANT! Note: 41467-01 8/14/2001...
® STEP 4 - WIRING THE FAN WARNING WARNING Ceiling Canopy Plate Note: 41467-01 8/14/2001...
Page 12
® Canopy Ceiling Plate Trim Ring CAUTION CONNECTING FAN TO ELECTRICAL SOURCE continued 41467-01 8/14/2001...
Page 13
® Black Power Wires White Ceiling Bare or Green Outlet Box 2 x 4 Brace Green Ceiling Plate Approved Connectors Green Ground Wire from Hanger Pipe (not present with flush mounting option) 41467-01 8/14/2001...
® STEP 5 - ATTACHING THE CANOPY Groove in Hanger Ball Groove in Hanger Ball Canopy Ceiling Plate Canopy WARNING 41467-01 8/14/2001...
Page 15
® STEP 6 - ATTACHING THE CANOPY TRIM RING Canopy Trim Ring Ceiling Ceiling Plate Plate Canopy Hooks Screw Canopy Screw Canopy Press Press Here To Here To Tabs Remove Remove Canopy Canopy Trim Ring Canopy Trim Ring Note: 41467-01 8/14/2001...
® STEP 9 - REMOTE CONTROL REMOTE CRADLE INSTALLATION ROCKER LIGHT SWITCH WALL INSTALLATION STANDARD LIGHT SWITCH Note: Wall anchors and 6-32 x 1” screws may be used in situations where mounting to a stud is not pos- sible. Use the inner mounting holes. Remove Remove 41467-01 8/14/2001...
® BATTERY INSTALLATION Back of Remote DIP Switches Battery Compartment Press Cover Here and Slide Down Note: DIP SWITCH SETTING Cover Note: You will only have to change the DIP switch settings in the remote if you are using more than one re- mote controlled fan in the same area and want to control them separately.
® FAN CONTROL AIRFLOW DIRECTION Note: If the fan is not functioning af- ter installation: POWER FAILURE Light Fan High Fan Off Medium Reverse 41467-01 8/14/2001...