Apm - Asus M5A97 EVO R2.0 User Manual

3.5.8

APM

UEFI BIOS Utility - Advanced Mode
Main
Back Advanced\
ERP Ready
Restore AC Power Loss
Power On By PS/2 Device
Power On By PME Device
Power On By Ring
Power On By RTC
ErP Ready [Disabled]
[Disabled]
[Enabled]
Restore AC Power Loss [Power Off]
When set to [Power Off], the system goes into off state after an AC power loss. When set
to [Power On], the system will reboot after an AC power loss. When set to [Last State], the
system goes into either off or on state, whatever the system state was before the AC power
loss.
Configuration options: [Power Off] [Power On] [Last State]
Power On By PS/2 Device [Disabled]
[Disabled]
[Enabled]
Power On By PME Device [Disabled]
[Disabled]
[Enabled]
3-26
Ai Tweaker Advanced
APM >
Version 2.00.1208. Copyright (C) 2012 American Megatrends, Inc.
Disables the Energy Related Products (ErP) Ready function.
Allows BIOS to switch off some power at S5 state to get system ready for
the ErP requirement. When set to [Enabled], power for WOL, WO_USB,
audio and onboard LEDs will be switched off at S5 state.
Disables the PS/2 devices from generating a wake event.
Enables the PS/2 devices to generate a wake event.
Disables the PME devices from generating a wake event.
Enables the PME devices to generate a wake event.
Monitor Boot
Allow BIOS to switch off some power
at S5 to get the system ready for ErP
requirement. When set to Enabled, all
Disabled
other PME options will be switched off.
Power Off
Disabled
Disabled
Disabled
Disabled
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Shortcut
F5: Optimized Defaults
F10: Save
F12: Print Screen
Chapter 3: BIOS setup
Exit
Tool
ESC: Exit