Table of Contents
Advertisement
Problems
3. Display position is incorrect.
4. Screen image is smaller or larger
than the actual screen images.
5. Vertical bars of distortion appear.
6. Horizontal bars of distortion appear.
7. Letters and lines appear blurred.
8. Distortion appears like the figure
below.
9. The screen is too bright or too dark.
10. Afterimages appear.
Points to check with possible solutions
Adjust the image position using the <Position>
(p.23) If the problem persists, use the graphics
board's utility software to change the display
position if available.
Adjust the resolution using the <Resolution> (p.23)
Decrease the vertical bars using the <Clock>. (p.22)
Decrease the horizontal bars using the <Phase>.
(p.22)
Adjust the blurred lines using <Smoothing> (p.26)
This happens when both composite (X-OR) input
signal and separate vertical synchronizing signal
are input. Please select one of the two.
Adjust the <Contrast and Brightness> (The
backlight of the LCD monitor has a fixed life span.
When the screen becomes dark or begins to flicker,
please contact your dealer.)
When the screen image is changed after displaying
the same image for a long period, an afterimage
may appear. The "Afterimage" can be removed
gradually by changing the displayed image. Use the
"Off Timer" function and avoid keeping the screen
on all the time. (p.19)
7. TROUBLESHOOTING
English
37
Advertisement
Table of Contents
