Enabling Geforce ® Boost - Asus M4N82 - Deluxe Motherboard - ATX User Manual

5.2.2 Enabling GeForce
Before enabling GeForce Boost, ensure that you have installed a dGPU recommended for
GeForce Boost on your motherboard.
GeForce Boost
1. Turn on the system and press <Del> during the Power-On Self-Test (POST) to enter
the BIOS Setup Utility.
Go to Advanced > Chipset > SouthBridge Configuration and set the Hybrid SLI
2.
support item to [Auto]. See section 3.6.2 Chipset for details.
The Hybrid Support item becomes user-configurable only when a dGPU is detected.
Ensure that your dGPU is properly installed.
Advanced Chipset Settings
Hybrid SLI support
Hybrid SLI Frame buffer size
Primary Graphics Adapter
SouthBridge ACPI HPET TABLE
3. Save your changes and Exit Setup.
Place the motherboard support DVD into the optical drive, and go to the Drivers menu
4.
to install the NVIDIA Chipset Driver Program.
5. Restart the system.
6. If the driver is correctly installed, you will find the
Hybrid SLI icon on the taskbar.
The Hybrid SLI icon indicates that the system is
in Performance mode and that GeForce Boost is
enabled. The onboard GPU will share the rendering
load with the dGPU and boost the performance of the
dGPU.
Visit www.asus.com for the latest chipset driver.
5-8
Boost™
®
BIOS SETUP UTILITY
Advanced
[Disabled]
[Disabled]
[PCIE VGA Card Firs]
[Enabled]
1 Memory have to
over 2G size
2 At least 256 MB of
frame buffer size
3 External VGA
must support this
feature
Chapter 5: NVIDIA SLI™ technology support
®