Enabling Geforce - Asus M3N-HT DELUXE User Manual

6.2.2

Enabling GeForce

Before enabling GeForce Boost and HybridPower, make sure that you have
installed a dGPU recommended for GeForce Boost on your motherboard.
To enable GeForce Boost
1. Turn on the system and press <Del> during the Power-On Self-Test (POST)
to enter the BIOS Setup Utility.
Go to Advanced > Chipset and set the Hybrid Support item to [Auto]. See
2.
section 4.4.4 Chipset for details.
The Hybrid Support item becomes user�configurable only when a dGPU is
detected. Make sure that your dGPU is properly installed.
Advanced
Hybrid Support
iGPU Frame Buffer Control [Auto]
x Frame Buffer Size
Onboard GPU
K8<->NB HT Speed
K8<->NB HT Width
CPU Spread Spectrum
PCIE Spread Spectrum
SATA Spread Spectrum
Primary Display Adapter
3. Save your changes and Exit Setup.
4. Place the motherboard support DVD into the optical drive, and go to the
Drivers menu to install the NVIDIA Chipset Driver Program.
5. Restart the system.
6. If the driver is correctly installed, you will find the
Hybrid SLI icon on the taskbar.
The Hybrid SLI icon indicates that the system is
in Performance mode and that GeForce Boost
is enabled. The onboard GPU will share the
rendering load with the dGPU and boost the
performance of the dGPU.
Visit www.asus.com for the latest chipset driver.
6-10
Boost and HybridPower™
®
Phoenix-AwardBIOS CMOS Setup Utility
Chipset
[Auto]
128M
[Auto]
[Auto]
[Auto]
[Disabled]
[Disabled]
[Down Spread]
[PCI-E]
Select Menu
Item Specific Help
Chapter 6: NVIDIA ® technology support