Asus Ez Flash 2 Utility - Asus M4N78 - PRO w/ Athlon II X2 240 User Manual

Updating from a BIOS file
Select Update BIOS from a file, then click Next.
a.
Locate the BIOS file from the Open window, then click Open.
b.
3. Follow the onscreen instructions to complete the updating process.
2.1.2

ASUS EZ Flash 2 utility

The ASUS EZ Flash 2 feature allows you to update the BIOS without having to use a
bootable floppy disk or a DOS-based utility.
Before using this utility, download the latest BIOS file from the ASUS website at www.asus.
com.
To update the BIOS using EZ Flash 2:
1. Insert the USB flash disk that contains the latest BIOS file to the USB port, then launch
EZ Flash 2. You can launch EZ Flash 2 in two ways.
a. Press <Alt> + <F2> during POST to display the following:
Enter the BIOS setup program. Go to the Tools menu to select EZ Flash 2 and
•
press <Enter> to enable it.
Press <Tab> to switch between drives until the correct BIOS file is found.
4. When the correct BIOS file is found, EZ Flash 2 performs the BIOS update process
and automatically reboots the system when done.
• This function can support devices such as USB flash disk with FAT 32/16 format and
• Do not shut down or reset the system while updating the BIOS to prevent system boot
2-2
ASUSTek EZ Flash 2 BIOS ROM Utility V3.32
FLASH TYPE: MXIC 25L8005
Current ROM
BOARD: M4N78
VER: 0203 (H:00 B:01)
DATE: 12/30/2008
PATH: A:\
A:
Note
[Enter] Select or Load
[Up/Down/Home/End] Move
single partition only.
failure!
Update ROM
BOARD: Unknown
VER: Unknown
DATE: Unknown
[Tab] Switch [V] Drive Info
[B] Backup [ESC] Exit
ASUS M4N78