ASROCK 960GM/U3S3 FX User Manual page 40

AMD Turbo Core Technology
This item appears only when the processor you adopt supports this feature.
Use this to select enable or disable AMD Turbo Core Technology. Confi guration
options: [Auto] and [Disabled]. The default value is [Auto].
AMD IO C-State Support
This allows you to enable or disable AMD IO C-State Support. The default
value is [Enabled].
AMD APM
Application Power Management (APM) allows the processor to deterministi-
cally provide maximum performance while remaining within the specified power
delivery and removal envelope. APM dynamically monitors core activity and
generates an approximation of power consumption.When manually adjust the
CPU Multiplier/Voltage, APM status will automatically be set to disable. APM
is capable of being manually set enable if users still need this function. The
default value is [Auto].
Processor Maximum Frequency
It will display Processor Maximum Frequency for reference.
North Bridge Maximum Frequency
It will display North Bridge Maximum Frequency for reference.
Multiplier/Voltage Change
This item is set to [Auto] by default. If it is set to [Manual], you may adjust the
value of Processor Frequency and Processor Voltage. However, it is
recommended to keep the default value for system stability.
BIOS SETUP UTILITY
Main OC Tweaker Advanced
EZ Overclocking
Load Optimized CPU OC Setting
Load Optimized mGPU OC Setting
CPU Configuration
Overclock Mode
CPU Frequency (MHz)
PCIE Frequency (MHz)
Spread Spectrum
Boot Failure Guard
Boot Failure Guard Count
CPU Active Core Control
AMD Turbo Core Technology
AMD IO C-State Support
AMD APM
Processor Maximum Frequency
North Bridge Maximum Frequency
Multiplier/Voltage Change
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
CPU Frequency Multiplier
For safety and system stability, it is not recommended to adjust the value of
this item.
CPU Voltage
It allows you to adjust the value of CPU voltage. However, for safety and sys-
tem stability, it is not recommended to adjust the value of this item.
H/W Monitor Boot Security Exit
Overclocking may cause
[Press Enter]
damage to your CPU and
[Press Enter]
motherboard.
It should be done at
your own risk and
expense.
[Auto]
[200]
[100]
[Auto]
[Enabled]
[3]
Select Screen
[All Cores]
Select Item
[Auto]
Enter Go to Sub Screen
[Enabled]
F1 General Help
[Auto]
F9 Load Defaults
x31.5 6300 MHZ
F10 Save and Exit
x31.0 6200 MHz
ESC Exit
[Manual]
4 0 4 0 4 0 4 0 4 0