Chipset - Asus M4A88T-M LE User Manual

Advanced Clock Calibration [Disabled]
Adjusts the processor's overclocking capability. Select [Auto] to allow the BIOS automatically
adjusts this function. Select [All Cores] to configure all the processor cores as a whole.
Select [Per Core] to configure each processor core separately. Configuration options:
[Disabled] [Auto] [All Cores] [Per Core]
The following items only appear when you set Advanced Clock Calibration to [Auto],
[All Cores], or [Per Core].
Unleashing Mode [Disabled]
Enable the Unleashing Mode to get full computing power of the processor. However,
this might make your system unstable depending on your processor's overclocking
capability. Configuration options: [Enabled] [Disabled]
Active CPU Cores [Auto]
Allows you to manually turn ON/OFF a process core. Configuration options: [Auto]
[Manual]
2nd / 3rd / 4th Core [On]
These items only appear when you set Active CPU Cores to [Manual].
Configuration options: [On] [Off]
Value (All Cores) [-2%]
This item only appears when you set Advanced Clock Calibration to [All Cores]. It
allows you to set the overclocking percentage for all the processor cores as a whole.
Configuration options: [0%] [+2%] [+4%] [+6%] [+8%] [+10%] [+12%] [-2%] [-4%]
[-6%] [-8%] [-10%] [-12%]
Value (Core 0) / (Core 1) / (Core 2) / (Core 3) [-2%]
These items only appear when you set Advanced Clock Calibration to [Per Core]
and allow you to set the overclocking percentage for each process core separately.
Configuration options: [0%] [+2%] [+4%] [+6%] [+8%] [+10%] [+12%] [-2%] [-4%]
[-6%] [-8%] [-10%] [-12%]
2.5.2

Chipset

NorthBridge Configuration
DRAM Controller Configuration
Bank Interleaving [Auto]
Allows you to enable the bank memory interleaving. Configuration options: [Disabled]
[Auto]
Channel Interleaving [Auto]
Allows you to enable the channel memory interleaving.
Configuration options: [Disabled] [Address bits 6] [Address bits 12] [Auto]
[XOR of Address bits [20:16, 6]] [XOR of Address bits [20:16, 9]]
2-20 Chapter 2: BIOS information