Changing The Built-In Password - NETGEAR WNR3500v2 - RangeMax Wireless N Gigabit Router User Manual

NETGEAR RangeMax™ Wireless-N Gigabit Router WNR3500v2 User Manual

Changing the Built-In Password

1. Log in to the wireless router at its default LAN address of http://www.routerlogin.net with
its default user name of admin, default password of password, or using whatever password
and LAN address you have chosen for the wireless router.
Figure 3-1
2. From the main menu, under the Maintenance heading, select Set Password to display the Set
Password screen:
Figure 3-2
3. To change the password, first enter the old password, and then enter the new password twice.
4. Click Apply to save your changes.
Note: After changing the password, you must log in again to continue the
configuration. If you have backed up the wireless router settings previously,
you should do a new backup so that the saved settings file includes the new
password.
3-2
v1.0, May 2009
Protecting Your Network