Back Panel; Router Label - NETGEAR WNR3500v2 - RangeMax Wireless N Gigabit Router Setup Manual

Back Panel

The router back panel contains port connections described in
Figure 4

Router Label

The label on the back of the wireless router shows the router's MAC address, serial number,
security PIN, power on/off button, and factory default access login information.
The ports on the router are color-coded to distinguish your Internet port from the other four ports
that connect to the wired computer(s) on your Local Area Network (LAN).
Figure 5
4
1. Restore factory settings button. Press for approximately 5
seconds to reset the router to the factory default settings.
2. Four Local Area Network (LAN) 10/100/1000 Mbps Ethernet
ports for connecting the router to your local computers.
3. Internet/Wide Area Network (WAN) Ethernet port for connecting
the router to a cable or DSL modem.
4. Power on/off push-button.
5. AC power adapter outlet for connecting the power adapter.
Figure 4.
Getting to Know Your Wireless Router