Put In The Laundries; Usage Of The Detergent; How To Use Liquid Detergent - Haier HWM110-9188 User Manual

Put in the laundries

Usage of the detergent

Liquid whitener inlet
Washing powder inlet

How to use liquid detergent

Put the liquid detergent box on the left of the detergent
box. See the above figure.
Before washing put the liquid detergent
detergent box directly as indicated the above figure.
The usage and dose of the liquid detergent as per the
specifications of liquid detergent.
How to use whitener
Add water to stipulated level. Dilute the whitener with container,
and then pour it into the liquid whitener inlet slowly.
Laundries with color or pattern is not colorfast, thus not applicable.
The whitener shall not touch laundries directly.
See to the manual of whitener for the usage and dosage.
For whitener in powder, dissolve it before use.
The capacity of washing and spinning of the machine
refer to the largest weight of the standard laundries
under dry condition. that can be washed or spinning
in one time. One time washing quantity shall be lower
than the rated capacity. The largest capacity of this
machine is 11.0kg.
The thickness, size, type of the cloth will influence the
actual washing capacity. It is suitable for one time
washing to put in reasonable amount of laundries
and the laundries can be turned round in washing.
Do not select above 8 water level for laundries small
than 2.0kg, so as to avoid splashing of water.
Control panel seat
Liquid detergent box
Softener inlet
Detergent box
into the liquid
9
The usage and dose of the softener as per the specifications of softener.
Before washing put the softener into the detergent box directly as
indicated in the left figure The softener will put into the washer
when the last rinsing.
After that,please close the detergent box Refer to the following list for
the usage of the detergent: selection of the water level,water quantity
and dosage of detergent
After the softener is put in, please don't place for a long time otherwise
softener may solidify and cause flowing not smooth.
How to use washing powder
It is suggested to add washing powder into the box
directly under fuzzy program and reserve program.
Dissolve directly inside the washing machine: (not
applicable for fuzzy and reserve program)
1.Add some water (select " 1 " water level).
2.Add washing powder. Run for about 30s to fully dissolve
the Powder. Then push the "START/HOLD" button.
3.Put in laundries. Select suitable water level. Push the
"START/HOLD"button again.
Quick dissolving of washing powder:
1.Prepare warm water of 30 C and container.
2. Add washing powder while stirring to dissolve it completely.
Please add suitable washing powder as per the laundries
quantity, the set water level and water quantity.
If you select "SPEEDY" program, it is suggested to use
liquid detergent instead of washing powder to guarantee
the washing effect.
It is not recommended to use rich-foam washing powder.
Washing powder with poor quality or long-time storage may
get caked. Please clean the detergent box duly in usage.