Postscript Envelope Size Support - Lexmark 34S0109 - E 260dt B/W Laser Printer Reference

= Supported
X = Not supported
Operator Tray selected (corresponding image
size is set)
customtray tray with custom-size paper
executivetray tray with executive-size paper
foliotray tray with folio-size paper
ledgertray tray with ledger-size paper
legaltray tray with legal-size paper
lettertray tray with letter-size paper
oficiotray tray with oficio-size paper
statementtray tray with statement-size paper
11x17tray tray with 11 x 17-inch paper

PostScript envelope size support

The literal names in "Envelope sizes supported" on page 14 are also supported as operators in userdict. These
operators change the image size, but do not change the active paper source. Therefore, when these operators are
used, part of the image may be clipped.
When these literal names are used as operators, it is equivalent to executing the following PostScript emulation
sequence. The following example uses a 3.875 x 7.5 envelope.
<</Policies <</PageSize 7>> /PageSize [279 540]>> >>setpagedevice
Envelope sizes supported
= Supported
X = Not supported
Envelope sizes
Size name Literal name
7 3/4 3.875x7.5envelope
Commercial 9 3.875x8.875envelope 98.4 x 225.4
Commercial 10 4.125x9.5envelope
International DL 110x220envelope
* For other envelopes, the page is formatted to 216 x 356 mm (8.5 x 14 in.) unless a size is specified by your software
program.
E260, E260d/dn, E360d/dn,
E460dn/dw
X
X
X
Size (mm) Size (inches) Size (points) E260,
98.4 x 190.5 3.875 x 7.5
3.875 x 8.875 279 x 639
104.8 x 241.3 4.125 x 9.5
110 x 220 4.33 x 8.66
PostScript (PS) emulation
14
Printer models
X203n MFP, X204n MFP
X
X
X
Printer models
E260d/dn,
E360d/dn,
E460dn/dw
279 x 540
297 x 684
312 x 624
X203n MFP,
X204n MFP