Table of Contents
Advertisement
2
Unpack the memory card.
Note: Avoid touching the connection points along the edge of the card.
3
Holding the card by its sides, align the plastic pins on the card with the holes on the system board. This ensures the
metal pins line up correctly as well.
1
Plastic pins
2
Metal pins
4
Push the card firmly into place.
Notes:
•
The entire length of the connector on the card must touch and be flush against the system board.
•
Be careful not to damage the connectors.
1
1
1
2
2
2
Additional printer setup
20
Advertisement
Table of Contents
