GE PVB98STSS Installation Instructions Manual page 12

3 INSTALL REMOTE SWITCH
WARNING:
result in personal injury or damage to the electrical
controls.
WARNING:
The remote switch must be located so that it can be
to do so may result in ignition of clothing which could
cause serious injury or death.
switch is less than 48" and more than 15".
be installed so that it is not pinched and is away
from moving parts.
vent overlaps.
to cover any gaps.
tertop, ensure that it is installed in a location that
meets local codes and is easily accessible.
Installation Instructions
SHOCK HAZARD
BURN HAZARD
Remote
Harness
Hole
Remote
Connect Remote Switch to Remote Harness
hole and attach the harness connector to the
remote connector.
foam piece and mount the remote switch on the
countertop such that the switch connectors stay
and attach the loose wire with a wire tie.
Control
Box
Connect Wire Lead to Control Box
the mating connector.
the wire to the clamp with a wire tie. This will act
as a strain relief.
12
Remote Harness