Supplied Accessories; Quick Reference; Attaching The Stand - Sharp LC-32SH10U Operation Manual

Supplied accessories

Make sure the following accessories are provided with the product.
Remote control unit (
Page 8
Cable Clamp ( 1)
X
Page 7
NOTE
• Always use the AC cord supplied with the TV.

QUICK REFERENCE

Attaching the stand

• Before attaching (or detaching) stand, unplug the AC cord from the AC input terminal.
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.
CAUTION
• Attach the stand in the correct direction.
• The "REAR" label should be visible from the back of the TV.
• Incorrect installation of the stand may result in the TV falling over.
• Be sure to follow the instructions.
1. Confi rm the 8 screws supplied with the TV.
Short screws ( 4)
X
(used in step 2)
2. Attach the two parts of the stand unit to each other using
the 4 short screws and the hex key (supplied with the
product) as shown.
Short screw
NOTE
• To detach the stand, perform the steps in reverse order.
6
1) "AA" size battery (
X
Stand unit (
Long screws ( 4)
X
(used in step 3)
hex key
2)
X
Page 8
X 1)
Page 6
This side faces the rear.
3.
1
Insert the stand into the opening on the bottom of the
TV.
2
Insert and tighten the 4 long screws into the 4 holes on
the rear of the TV.
2
Soft cushion
1
AC cord ( 1)
X
Page 7
Operation manual ( X 1)
LC-26SH10U
LC-32SH10U
LIQUID CRYSTAL TELEVISION
TÉLÉVISEUR ACL
TELEVISOR CON PANTALLA
DE CRISTAL LÍQUIDO
OPERATION MANUAL
MODE D'EMPLOI
MANUAL DE OPERACIÓN
hex key
Long screw