Using The Controls; The Reverb - Yamaha SILENT ELECTRIC Cello SVC50 Owner's Manual

1
Slide the POWER switch, located on the rear of the
instrument, to its ON position. The lamp will light
green.
2
Connect a pair of stereo headphones to the PHONES
jack on the rear of the instrument. Make sure that
the L&R sides of the headphones are positioned on
the correct ears.
3
Rotate the VOLUME dial to the desired playing
level.
• When using the headphones, do not operate at high volume
levels or long periods of time. Doing so can lead to irrepa-
rable damage to your hearing.
The Silent Electric Cello incorporates Yamaha's
DSP reverb technology. Play while trying out
the three types of reverb.
1
Slide the POWER switch to the REV. ON position,
the lamp will light red, and reverb will be applied to
the Silent Electric Cello's sound.
2
Slide the REVERB switch to select one of the three
reverb modes.
• RM (ROOM) mode ......... this reverb simulates the natural reverberation found in a room.
• HL1 (HALL 1) mode ...... this reverb simulates the natural reverberation found in a hall.
• HL2 (HALL 2) mode ...... the same reverb simulation as HL1 but with a longer decay time.

Using the Controls

The Reverb

Lights green
Lights red
15