Gigabyte GA-8N-SLI Pro Manual page 7

Step 5:
Next, select the hard drives which you wish to be included in the disk array. The Free Disks section
displays the information about the currently installed SATA hard drives. Press the TAB key to move to
the Free Disks section. Select the target hard drives using the UP or DOWN ARROW key and use the
RIGHT ARROW key to add the hard drives to the Array Disks section (Figure 7).
RAID Mode: Striping
Free Disks
Loc Disk Model Name
[ESC] Quit
Step 6:
Press F7 after selecting the target hard disks. A message which says "Clear disk data?" will appear.
If you are sure to clear the data in the selected hard drives, press Y. (If the hard drives contain previously
created RAID array, you need to press Y to clear the data from the hard drives.)
RAID Mode: Striping
Free Disks
Loc Disk Model Name
[ESC] Quit
NVIDIA RAID Utility Nov 5 2004
- Define a New Array -
[g] Add
[f ] Del
[F6] Back [F7] Finish
NVIDIA RAID Utility Nov 5 10 2004
- Define a New Array -
Clear disk data ?
[Y] YES
[g] Add
[f ] Del
[F6] Back [F7] Finish
Striping Block: Optimal
Array Disks
Loc Disk Model Name
2.0.M ST3120026AS
2.1.M ST3120026AS
[TAB] Navigate [hi] Select
Figure 7
Striping Block: Optimal
Array Disks
Loc Disk Model Name
1.0.M ST3120026AS
[N] NO
1.1.M ST3120026AS
[TAB] Navigate [hi ] Select
Figure 8
- 7 - SATA Hard Drive Configurations (nForce series)
[ENTER] Popup
[ENTER] Popup