Gigabyte GA-8N-SLI Pro Manual page 10

Sata hard drive configurations

Hide thumbs Also See for GA-8N-SLI Pro:

Step 4:

Double-click MENU.exe. An MS-DOS prompt screen similar to Figure 13 below will appear

Step 5:

Insert an empty floppy disk and select the nVIDIA Series ATA driver by pressing the corresponding letter

from the menu

(for example, from the menu in Figure 13, press G to select nVIDIA Series ATA

(Note 2)

(XP) if you wish to install Windows XP or press I to select nVIDIA Series ATA (2K) if you wish to install

Windows 2000). Then it will take about one minute to copy the SATA driver from the motherboard driver

CD to the floppy disk.

Step 6:

Press 0 to exit when the procedure is complete.

(Note 1): The name of the drivers in the menu might differ, depending on the version of your

driver CD-ROM disk.

(Note 2): Select the driver by pressing the corresponding letter according to the operating system

you wish to install. The Nvidia Parallel items in Figure 13 are for IDE RAID hard disks.

SATA Hard Drive Configurations (nForce series) - 10 -

Figure 13

(Note 1)

Table of Contents

Nforce series