Brother PT 7600 - P-touch EDGE 7600 B/W Thermal Transfer Printer User Manual page 11

Batteries (Alkaline/Rechargeable)
Follow these guidelines to avoid leakage, or damage to the batteries.
Do not use metallic articles, such as
tweezers or a metallic pen, when
exchanging the batteries.
Do not charge the batteries in high
temperature locations.
Do not throw into fire, heat up, or
disassemble the battery.
If battery fluid comes into contact with skin
or clothes, wash the affected areas
thoroughly with clean water. Battery fluid is
harmful to skin.
P-touch labeler
Follow these guidelines to avoid fire, damage, electric shock, and choking.
Do not allow the P-touch labeler to get wet
in any way.
Do not touch any metal parts near the print
head. The print head becomes very hot during
use and remains very hot immediately after
use. Do not touch it directly with your hands.
Print head
Do not use the P-touch labeler with a foreign
object in it. If water, metallic substance or any
foreign object enters the P-touch labeler,
disconnect the AC adapter and remove battery,
and contact the retail outlet where the P-touch
labeler was purchased or your local authorized
service center.
Do not touch the blade of the cutter unit.
WARNING
If the batteries leak, make sure the fluid does
not come into contact with your eyes, as this
may result in loss of eyesight. If contact
does occur, flush eyes with clean water and
seek medical attention urgently.
If the batteries begin to emit an odor,
overheat, discolor, deform, or any other
change occurs during use, charging, or
storage, remove the batteries immediately
and discontinue use.
Do not disassemble the P-touch labeler. For
inspection, adjustment, and repair of the P-
touch labeler, contact the retail outlet where
the P-touch labeler was purchased or your
local authorized service center.
Plastic bags are used in the packaging of
your machine. To avoid danger of
suffocation, keep these bags away from
babies and children.
Disconnect the AC adapter and remove
battery immediately and stop using when
you notice abnormal odour, heat,
discoloration, deformation or anything
unusual while using or storing it.
To prevent damage, do not drop or hit the
machine.
iii